Institutional Repository of Key Laboratory of Marine Environmental Corrosion and Bio-fouling, IOCAS
Corrosion behavior of steel in Chengdao offshore oil exploitation area | |
Li, Y; Hou, B; Li, H; Zhang, J | |
2004-04-01 | |
发表期刊 | MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION |
卷号 | 55期号:4页码:305-309 |
文章类型 | Article |
摘要 | From September 1992 to September 1995, the corrosion behavior of three marine steels was studied in Chengdao offshore area by means of individually and electro-connectedly hanging plates in order to provide data for anticorrosion design of oil-exploitation structures there. The variation trend of corrosion rate with exposure time showed that the variation curves and degrees of three steels were generally identical and had nothing to do with the exposure time. The whole change trend of corrosion rates in three years showed that the corrosion rates of 20(#) steel were nearly identical in different positions, each of which was a little lower than that of 16 Mn steel specimens in corresponding positions, also was lower than that of; steel specimens in tidal zone and immersion zone. Although 20(#) steel corroded rapidly at first, its corrosion rate has a decreasing trend in the long-term service. Therefore, 20(#) steel is feasible to be applied for a long time in various marine zones, especially nearby the low tidal line and immersion zone. The results of A(3) steel, 16 Mn steel and 20(#) steel by means of electrically connected hanging plate in three years indicated that the corrosion of the steel specimens in the splash zone was the most severe as the result of dry-wet cycle and macrocell effect. Specimens in the other positions corroded mildly, and that in tidal zone corroded most slowly. The corrosion rate of 20(#) steel was the highest among the three steels in the test, and the corrosion rates of A(3) steel and 16 Mn steel were identical on the whole. When the specimens were hanged electro-connectedly, the macrocell effect generally tended to increase with exposure time. The. highest corrosion rate of A(3) steel in the splash zone in the three years was about 0.278 mm/a, while that of 16 Mn steel was about 0.321 mm/a, and that of 20(#) steel was 0.330 mm/a or so. In contrast, the corrosion rate of the steels in the tidal zone was the lowest in three years, which were 0.052 mm/a (A(3) steel), 0.048 mm/a (16 Mn steel) and 0.040 mm/a (20(#) steel). |
DOI | 10.1002/maco.200303712 |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000220947100008 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.qdio.ac.cn/handle/337002/33012 |
专题 | 海洋环境腐蚀与生物污损重点实验室 |
作者单位 | Chinese Acad Sci, Inst Oceanol, Dept Marine Corros, Qingdao 266071, Peoples R China |
推荐引用方式 GB/T 7714 | Li, Y,Hou, B,Li, H,et al. Corrosion behavior of steel in Chengdao offshore oil exploitation area[J]. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,2004,55(4):305-309. |
APA | Li, Y,Hou, B,Li, H,&Zhang, J.(2004).Corrosion behavior of steel in Chengdao offshore oil exploitation area.MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,55(4),305-309. |
MLA | Li, Y,et al."Corrosion behavior of steel in Chengdao offshore oil exploitation area".MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION 55.4(2004):305-309. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Corrosion behavior o(130KB) | 期刊论文 | 出版稿 | 限制开放 | ODC PDDL | 浏览 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[Li, Y]的文章 |
[Hou, B]的文章 |
[Li, H]的文章 |
百度学术 |
百度学术中相似的文章 |
[Li, Y]的文章 |
[Hou, B]的文章 |
[Li, H]的文章 |
必应学术 |
必应学术中相似的文章 |
[Li, Y]的文章 |
[Hou, B]的文章 |
[Li, H]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论