Institutional Repository of Key Laboratory of Marine Environmental Corrosion and Bio-fouling, IOCAS
Pure mechanical wear loss measurement in corrosive wear | |
Huang, YL; Jiang, XX; Li, SZ | |
2000-12-01 | |
发表期刊 | BULLETIN OF MATERIALS SCIENCE |
ISSN | 0250-4707 |
卷号 | 23期号:6页码:539-542 |
文章类型 | Article |
摘要 | The method for the measurement of the pure mechanical wear loss for 321 stainless steel, 1045 steel and pure iron in the study of the synergy between corrosion and wear was studied, The methods studied included the measurement in distilled water, by cathodic protection and by adding inhibitor KI, and all were compared with the wear loss in air. The experiment showed that the pure mechanical wear losses and friction coefficients obtained by the three methods were close to each other and can be used to calculate the various wear components in the study of the interaction of corrosion and wear, but the measurements in distilled water for pure iron and 1045 steel are not recommended due to their corrosion.; The method for the measurement of the pure mechanical wear loss for 321 stainless steel, 1045 steel and pure iron in the study of the synergy between corrosion and wear was studied, The methods studied included the measurement in distilled water, by cathodic protection and by adding inhibitor KI, and all were compared with the wear loss in air. The experiment showed that the pure mechanical wear losses and friction coefficients obtained by the three methods were close to each other and can be used to calculate the various wear components in the study of the interaction of corrosion and wear, but the measurements in distilled water for pure iron and 1045 steel are not recommended due to their corrosion. |
关键词 | Corrosive Wear Synergy Pure Mechanical Wear Loss |
学科领域 | Materials Science, Multidisciplinary |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000166200400015 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.qdio.ac.cn/handle/337002/2352 |
专题 | 海洋环境腐蚀与生物污损重点实验室 |
作者单位 | 1.Chinese Acad Sci, Inst Oceanol, Marine Corros & Protect Lab, Qingdao 266071, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110015, Peoples R China |
推荐引用方式 GB/T 7714 | Huang, YL,Jiang, XX,Li, SZ. Pure mechanical wear loss measurement in corrosive wear[J]. BULLETIN OF MATERIALS SCIENCE,2000,23(6):539-542. |
APA | Huang, YL,Jiang, XX,&Li, SZ.(2000).Pure mechanical wear loss measurement in corrosive wear.BULLETIN OF MATERIALS SCIENCE,23(6),539-542. |
MLA | Huang, YL,et al."Pure mechanical wear loss measurement in corrosive wear".BULLETIN OF MATERIALS SCIENCE 23.6(2000):539-542. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
huang-Pure mechanica(68KB) | 限制开放 | -- | 浏览 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论