Effective time of a diffusion source in a pack cementation process on the AZ91D magnesium alloy
Lu, Dongzhu1,2,3,4,5; Jiang, Quantong1,2,4; Ma, Xiumin1,2,4; Fan, Liang1,2,4; Huang, Yanliang1,2,4; Hou, Baorong1,2,4
2023-05-01
发表期刊JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
ISSN2238-7854
卷号24页码:5552-5562
通讯作者Lu, Dongzhu(hyl@qdio.ac.cn) ; Huang, Yanliang()
摘要The powder thermal diffusion alloying method is an important method to fabricate intermetallic coatings on magnesium alloy substrates. The diffusion source, the diffusion time and the diffusion temperature are key parameters for a diffusion alloying process. While the effective time of an active diffusion source at the diffusion temperature is still unclear. Clarification of the effective time of a diffusion source is important, as the diffu-sion source could be utilized effectively and economically only if the effective time of the active diffusion source is known. Here, the effective time of a diffusion source at 400 & DEG;C was investigated. Results show that, the effective time of the diffusion source which contains 10 g ZnO and 1 g NH4Cl is around 150 h at 400 & DEG;C. For a more compact diffusion source, the effective time is relatively shorter. Then, chemical reactions in the diffusion source at elevated temperature were analyzed. The failure of the diffusion source is related to the reduction in the number of active metal ions, while an ineffective diffusion source can be reactivated by addition of new halide powder. These results could deepen the under-standing of the role of the diffusion source in a powder thermal diffusion alloying process and indicate a limit under which the diffusion source could be utilized effectively.& COPY; 2023 The Author(s). Published by Elsevier B.V.This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
关键词Pack cementation Diffusion source Effective time Powder Magnesium
DOI10.1016/j.jmrt.2023.04.134
收录类别SCI
语种英语
资助项目National Natural Science Foundation of China for Exploring Key Scientific Instruments[41827805] ; Wenhai Program of the Samp;T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology (QNLM) , China[2021WHZZB2302] ; Guangxi Key Laboratory of Marine Environmental Science, Guangxi Academy of Sciences, China[GXKLHY22-01] ; Overseas Science and Education Cooperation Center Deployment Project, Chinese Academy of Sciences, China[121311KYSB20210005] ; Nantong Science and Technology Development Funds, China[JC2021022] ; Baoding Science and Technology Development Funds, China[2022chuang009]
WOS研究方向Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号WOS:001030075500001
出版者ELSEVIER
WOS关键词PROTECTIVE-COATINGS ; MICROSTRUCTURE ; OXIDE ; LAYER
引用统计
文献类型期刊论文
条目标识符http://ir.qdio.ac.cn/handle/337002/182506
专题海洋环境腐蚀与生物污损重点实验室
通讯作者Lu, Dongzhu; Huang, Yanliang
作者单位1.Chinese Acad Sci, Inst Oceanol, CAS Key Lab Marine Environm Corros & Biofouling, Qingdao 266071, Peoples R China
2.Pilot Natl Lab Marine Sci & Technol Qingdao, Open Studio Marine Corros & Protect, Qingdao 266237, Peoples R China
3.Guangxi Acad Sci, Guangxi Key Lab Marine Environm Sci, Nanning 530007, Peoples R China
4.Chinese Acad Sci, Ctr Ocean Mega Sci, Qingdao 266071, Peoples R China
5.Nantong Zhongke Marine Sci & Technol Res & Dev Ctr, Nantong 226006, Peoples R China
第一作者单位中国科学院海洋研究所
通讯作者单位中国科学院海洋研究所
推荐引用方式
GB/T 7714
Lu, Dongzhu,Jiang, Quantong,Ma, Xiumin,et al. Effective time of a diffusion source in a pack cementation process on the AZ91D magnesium alloy[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2023,24:5552-5562.
APA Lu, Dongzhu,Jiang, Quantong,Ma, Xiumin,Fan, Liang,Huang, Yanliang,&Hou, Baorong.(2023).Effective time of a diffusion source in a pack cementation process on the AZ91D magnesium alloy.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,24,5552-5562.
MLA Lu, Dongzhu,et al."Effective time of a diffusion source in a pack cementation process on the AZ91D magnesium alloy".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 24(2023):5552-5562.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Lu, Dongzhu]的文章
[Jiang, Quantong]的文章
[Ma, Xiumin]的文章
百度学术
百度学术中相似的文章
[Lu, Dongzhu]的文章
[Jiang, Quantong]的文章
[Ma, Xiumin]的文章
必应学术
必应学术中相似的文章
[Lu, Dongzhu]的文章
[Jiang, Quantong]的文章
[Ma, Xiumin]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。