A viable approach to repair neutron shielding B 4 C/6061 Al composite sheets through cold spray and hot rolling co-treatment

doi:10.1016/j.jmst.2021.06.085

	A viable approach to repair neutron shielding B 4 C/6061 Al composite sheets through cold spray and hot rolling co-treatment
	Qiu, Xiang 1,2; Qi, Lu 3; Tang, Jun-rong 4; Tariq, Naeem ul Haq 5; Wang, Ji-qiang 4; Xiong, Tian-ying 4
	2022-04-20
发表期刊	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
ISSN	1005-0302
卷号	106 页码:173-182
通讯作者	Tariq, Naeem ul Haq(naeem421@hotmail.com) ; Wang, Ji-qiang(jqwang11s@imr.ac.cn)
摘要	Cold spray (CS) is considered as a new type of repairing technique for restoration or remanufacturing of a wide range of unserviceable engineering components due to its unique 'cold' characteristic. In this work, a viable repairing approach i.e. "cold spraying followed by hot rolling post-treatment" was successfully applied to restore defective neutron shielding B 4 C/6061 Al composite plates. Scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) results revealed that the coating-substrate interface is in a good bonding state without micro-cracks. Hot rolling post-treatment resulted in improved microstructure of the as-sprayed deposit with more uniform distribution of B 4 C particles in the matrix. Moreover, well bonded splat boundaries and strain free Al grains were evolved in the matrix due to enhanced splat deformation and continuous dynamic recrystallization (CDRX). Three-point bending test results revealed that the strength of the repaired material is at par with the in-service plates. The findings of this work could be considered as a great stride to further extend possible applications of CS for repairing engineering structural components. (c) 2022 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
关键词	B 4 C 6061 Al Cold spray Repairing Three-point bending test
DOI	10.1016/j.jmst.2021.06.085
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51671205] ; National Natural Science Foundation of China[51801217]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000787725900008
出版者	JOURNAL MATER SCI TECHNOL
引用统计	被引频次：12[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.qdio.ac.cn/handle/337002/178865
专题	海洋环境腐蚀与生物污损重点实验室
通讯作者	Tariq, Naeem ul Haq; Wang, Ji-qiang
作者单位	1.Qingdao Natl Lab Marine Sci & Technol, Qingdao 266237, Peoples R China 2.Chinese Acad Sci, Inst Oceanol, CAS Key Lab Marine Environm Corros & Bio fouling, Qingdao 266071, Peoples R China 3.Shandong Univ, Inst Frontier & Interdisciplinary Sci, Sci Ctr Mat Creat & Energy Convers, Qingdao 266237, Peoples R China 4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 5.Pakistan Inst Engn & Appl Sci, Dept Met & Mat Engn, Nilore, Islamabad, Pakistan
第一作者单位	中国科学院海洋研究所
推荐引用方式 GB/T 7714	Qiu, Xiang,Qi, Lu,Tang, Jun-rong,et al. A viable approach to repair neutron shielding B 4 C/6061 Al composite sheets through cold spray and hot rolling co-treatment[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2022,106:173-182.
APA	Qiu, Xiang,Qi, Lu,Tang, Jun-rong,Tariq, Naeem ul Haq,Wang, Ji-qiang,&Xiong, Tian-ying.(2022).A viable approach to repair neutron shielding B 4 C/6061 Al composite sheets through cold spray and hot rolling co-treatment.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,106,173-182.
MLA	Qiu, Xiang,et al."A viable approach to repair neutron shielding B 4 C/6061 Al composite sheets through cold spray and hot rolling co-treatment".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 106(2022):173-182.

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
1-s2.0-S100503022100（5753KB）	期刊论文	出版稿	限制开放	CC BY-NC-SA	浏览