Institutional Repository of Key Laboratory of Marine Environmental Corrosion and Bio-fouling, IOCAS
Fabrication of Ni3S2/TiO2 photoanode material for 304 stainless steel photocathodic protection under visible light | |
Nan, Youbo1,3; Wang, Xiutong1,2,4; Ning, Xiaobo1; Lei, Jing1; Guo, Siyao5; Huang, Yanliang1,2,4; Duan, Jizhou1,2,4 | |
2019-11-15 | |
发表期刊 | SURFACE & COATINGS TECHNOLOGY |
ISSN | 0257-8972 |
卷号 | 377页码:9 |
通讯作者 | Wang, Xiutong(wangxiutong@qdio.ac.cn) |
摘要 | TiO2 is a promising photoanode material for cathodic protection. However, the photogenerated electron efficiency of TiO2 under visible light is rather low because of its poor absorption of visible light and the instability of its electron-hole pairs, which limit its application in the field of photocathodic protection. Here, Ni3S2 was used to modify TiO2 to enhance its photocathodic protection effect. Ni3S2/TiO2 composites (NSTs) were successfully synthesized by the hydrothermal method. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to characterize morphology, crystal structure, and elemental composition and its valence state. The light absorption properties of the samples were characterized by UV-visible diffuse reflectance spectroscopy (DRS). In addition, the photocathodic protection effects of TiO2 and NSTs were evaluated by measurements of the open-circuit potential (OCP) and photocurrent density with time (j-t). The results showed that the NSTs provided better photocathodic protection than pure TiO2 to 304 stainless steel (304ss). |
关键词 | TiO2 Ni3S2 Photocathodic protection 304 stainless steel Visible light |
DOI | 10.1016/j.surfcoat.2019.124935 |
收录类别 | SCI |
语种 | 英语 |
资助项目 | Strategic Priority Project of CAS[XDA13040404] ; Shandong Key Research and Development Program[2016GGH4511] ; Shandong Key Laboratory of Corrosion Science, and Cooperative Innovation Center of Engineering Construction and Safety in Shandong Blue Economic Zone ; Strategic Priority Project of CAS[XDA13040404] ; Shandong Key Research and Development Program[2016GGH4511] ; Shandong Key Laboratory of Corrosion Science, and Cooperative Innovation Center of Engineering Construction and Safety in Shandong Blue Economic Zone |
WOS研究方向 | Materials Science ; Physics |
WOS类目 | Materials Science, Coatings & Films ; Physics, Applied |
WOS记录号 | WOS:000488417800055 |
出版者 | ELSEVIER SCIENCE SA |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.qdio.ac.cn/handle/337002/163299 |
专题 | 海洋环境腐蚀与生物污损重点实验室 |
通讯作者 | Wang, Xiutong |
作者单位 | 1.Chinese Acad Sci, Key Lab Marine Environm Corros & Biofouling, Inst Oceanol, Qingdao 266071, Shandong, Peoples R China 2.Pilot Natl Lab Marine Sci & Technol, Open Studio Marine Corros & Protect, Qingdao 266237, Shandong, Peoples R China 3.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 4.Chinese Acad Sci, Ctr Ocean Megasci, 7 Nanhai Rd, Qingdao 266071, Shandong, Peoples R China 5.Qingdao Univ Technol, Sch Civil Engn, Qingdao 266033, Shandong, Peoples R China |
第一作者单位 | 中国科学院海洋研究所 |
通讯作者单位 | 中国科学院海洋研究所; 中国科学院海洋大科学研究中心 |
推荐引用方式 GB/T 7714 | Nan, Youbo,Wang, Xiutong,Ning, Xiaobo,et al. Fabrication of Ni3S2/TiO2 photoanode material for 304 stainless steel photocathodic protection under visible light[J]. SURFACE & COATINGS TECHNOLOGY,2019,377:9. |
APA | Nan, Youbo.,Wang, Xiutong.,Ning, Xiaobo.,Lei, Jing.,Guo, Siyao.,...&Duan, Jizhou.(2019).Fabrication of Ni3S2/TiO2 photoanode material for 304 stainless steel photocathodic protection under visible light.SURFACE & COATINGS TECHNOLOGY,377,9. |
MLA | Nan, Youbo,et al."Fabrication of Ni3S2/TiO2 photoanode material for 304 stainless steel photocathodic protection under visible light".SURFACE & COATINGS TECHNOLOGY 377(2019):9. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Fabrication of Ni3S2(3480KB) | 期刊论文 | 出版稿 | 限制开放 | CC BY-NC-SA | 浏览 | |
Fabrication of Ni3S2(3480KB) | 期刊论文 | 出版稿 | 限制开放 | CC BY-NC-SA | 浏览 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论